Secret
Palace

The walls must be smooth, dry, dust-free, oil-free and neutral white. Seal the holes and cracks in the wall with filler or sand so that they are smooth. First apply a fixing primer to the wall. For this, primer, stabilizer, or a single coat of white paint is recommended. This practice reduces possible color differences or stains. It also prevents the risk of loosening the wallpaper as it is new plaster. Proper floor preparation requires greater sensitivity to possible transparency when applying thin or light-coloured wallpapers. Plain coated wallpapers are recommended instead of primer or white paint. If you are purchasing more than one roll of wallpaper, check the manufacture code for each, which must be the same to avoid possible color differences.

Carefully follow the next steps: Strips of desired length are cut. Take into account the measurement height. (Instructions are on the front of the label.) Roll the pattern inward. Apply the acrylic-based, multi-purpose, ready-to-use adhesive suitable for non-woven wallpapers to your walls. Follow the adhesive manufacturer's instructions. 1. Glue the strips next to each other (without overlapping) with the help of a spatula or brush. 2. Start in the middle and brush towards the edges to remove all air bubbles. Remove the remainder of the adhesive from the wallpaper. If this is not the case, dry it carefully with a damp cloth. DO NOT rub. Cut the excess wallpaper off the ceiling and baseboards with the utility knife. 3. Allow to dry quickly and avoiding excessive heat and drafts during application and drying time.

Whether it is domestic or imported wallpaper, cleaning instructions are indicated with symbols on the packaging of each product. These symbols contain recommended instructions according to the quality of the product and the density of the pattern. Therefore, you must strictly follow these instructions. At the same time, an instruction that is valid for one wallpaper does not mean that it is valid for another wallpaper. The way of cleaning generally valid for wallpapers is to adjust the cleaning according to the quality of the paper and the density of the pattern, to clean it with warm water and to dry it with a dry cloth after cleaning.

Quality wallpaper can be easily removed when dry. Check the results after applying three strips. Complaints in more than three lanes are unacceptable. It is your responsibility to continue to complete. Complaints should be reported immediately and directly to the distributor. Textile wallpapers are especially sensitive products. We recommend getting help from an experienced professional.